IOTA Silicone Oil（Anhui） Co., Ltd.
Hits: 426 img
In the fields of industrial equipment, high-temperature pipelines, outdoor steel structures, and specialty coatings, coating materials must remain stable within the temperature range of 250-500°C while possessing good surface quality and application convenience. IOTA 6046 Modified Silicone Resin, with its moderate temperature resistance range, excellent surface properties, and flexible curing methods, serves as an ideal base material for high-temperature coatings and weather-resistant coatings.
Moderate Temperature Resistance, Wide Application
Long-term temperature resistance of 250-500°C, covering most industrial high-temperature application scenarios
Suitable for protection of high-temperature pipelines, industrial furnaces, hot blast stoves, boilers, and other equipment
Excellent Surface Properties
Cured film hardness ≥1H, combining protective and wear-resistant functions
High gloss, good fullness, with excellent gloss and color retention
Smooth and flat film surface, good decorative effect
Flexible Curing Methods
Can air-dry at room temperature, facilitating on-site application and repair
High-temperature baking curing: 200°C/40 minutes or 250°C/20 minutes
Adding amino resin can further shorten curing time and improve production efficiency
Comprehensive Protective Capabilities
Good hydrophobic and moisture-proof properties, suitable for humid environments
Excellent weather resistance and chemical stability, long service life
Good electrical insulation properties, resistant to arcing and corona
| Parameter | Specification |
|---|---|
| Appearance | Light yellow to colorless transparent liquid, milky sheen permitted, free of mechanical impurities |
| Solid Content | 50±1% |
| Viscosity (No. 4 Cup) | 70–150 seconds |
| Acid Value | <5 mgKOH/g |
| Film Hardness | ≥1H (after complete curing) |
| Temperature Range | 250–500°C |
Industrial High-Temperature Equipment Protection
Anti-corrosion coatings for high-temperature pipelines, chimneys, and hot blast stove exteriors
Surface protection for industrial boilers and heat treatment equipment
Heat-resistant coatings for petrochemical equipment and reactors
Outdoor Steel Structures and Weather-Resistant Coatings
Long-term protection for bridges, storage tanks, towers, and other outdoor steel structures
Weather-resistant topcoats with excellent gloss and color retention
Anti-corrosion coatings for marine engineering and port machinery
Specialty Industrial Coatings
Heat-resistant coatings for automotive exhaust pipes and mufflers
High-temperature protection for engine peripheral components
Coatings for mechanical equipment operating in high-temperature environments
Decorative High-Temperature Coatings
Beautification and identification coatings for high-temperature chimneys and pipelines
Decorative protective coatings for industrial equipment
Artistic coatings in high-temperature environments
Curing Methods
| Curing Condition | Parameters |
|---|---|
| Room Temperature Air-Dry | Rapid surface drying, convenient for on-site application |
| High-Temperature Baking | 200°C/40 minutes or 250°C/20 minutes |
| Amino Resin Promotion | Adding appropriate amount of amino resin can shorten curing time |
Application Recommendations
Xylene recommended as diluent solvent; ensure it is free from water and sulfur-containing impurities
Substrates should be sandblasted or polished before application to ensure cleanliness and dryness
2-3 coats recommended, with 10-15 minutes flash-off between coats
Stir thoroughly before use, filter if necessary to remove mechanical impurities
Diluents must not contain water, sulfur-containing compounds, or pyridine impurities, as these will affect film performance
Ensure good ventilation in the application environment, strictly prohibit open flames, and operators should wear protective equipment
Keep equipment and tools clean to prevent contamination with dust or moisture
Strictly avoid contact with acids, alkalis, and amine compounds during storage
| Parameter | Description |
|---|---|
| Packaging Specifications | 20 kg/drum, 200 kg/drum (iron or plastic drums) |
| Storage Conditions | Ventilated, cool, dry place, avoid direct sunlight, keep away from heat sources and open flames |
| Storage Period | Tentatively six months |
| Precautions | Prevent acid and alkali contamination, keep sealed during storage |
Provides complete curing system matching recommendations and process guidance
Offers formulation optimization and performance tuning support based on application requirements
Assists customers with small-scale trials, pilot testing, and large-scale application implementation
From 250°C to 500°C, from Industrial Protection to Decorative Coatings—IOTA 6046, with Its Balanced Performance Design, Meets the Diverse Coating Needs in Medium to High-Temperature Fields.
Choosing IOTA 6046 Is Not Just Selecting a Modified Silicone Resin—It Is Choosing a Wise Solution That Balances Performance and Cost, Protection and Aesthetics.
