Silicone Flame Retardant IOTA 6107 : A TFMS-Free Phenylsiloxane Synergist for Transparent PC With Low Dosage and High Efficiency

Hits: 251 img

Product Overview

IOTA 6107 is a solid powdered phenylsiloxane resin whose hydroxyl groups provide good compatibility with engineering plastic matrices such as PC. During polymer combustion, it accelerates surface charring, forming a dense char layer that effectively blocks heat transfer and oxygen penetration, while also delivering smoke suppression — significantly improving the material's flame-retardant stability and rating.

Notably, IOTA 6107 adopts an upgraded catalyst system and contains no trifluoromethanesulfonic acid (TFMS) or its salts, eliminating the compliance and stability concerns associated with residual strong-acid catalysts in conventional silicone flame retardants.

For transparent PC, IOTA 6107's refractive index of 1.56 is very close to that of PC (~1.585), so it has minimal impact on transparency and does not noticeably impair optical performance.

Key Features

  • Efficient flame-retardant synergist: recommended dosage only 0.5–1.0%, used in combination with primary flame retardants.
  • Char promotion: accelerates surface charring to form a dense char layer, blocking heat transfer and oxygen penetration.
  • Smoke suppression: improves flame-retardant rating while suppressing smoke.
  • TFMS-free: upgraded catalyst system; contains no trifluoromethanesulfonic acid (TFMS) or its salts.
  • Transparency friendly: refractive index 1.56, close to PC, with minimal impact on optical performance.
  • Broad applicability: compatible with PC, PC/ABS, PA, PBT, PPO, and other thermoplastics.

Verified Formulation and Test Data (Transparent PC)

Component

Content

PC

99.1%

SFR-Si907 (silicone flame retardant)

0.5%

KSS (flame retardant)

0.4%

Measured performance:

Property

Value

Flame retardancy

Optimal

Light transmittance

88.6%

Haze

1.22%

Tensile strength

68.6 MPa

This formulation balances flame retardancy and optical performance: transmittance retained at 88.6% with haze of only 1.22%, optimal flame-retardant performance, and tensile strength of 68.6 MPa.

Reference Halogen-Free Flame-Retardant PC/ABS Formulation

Component

Content

PC

60–70%

ABS

10–20%

IOTA 6107

0.5–1%

Phosphorus-based flame retardant

10–15%

Anti-dripping agent

0.4–0.6%

Lubricant, antioxidant

0.1–0.2% each

Main Applications

Material

Application

Advantage

PC (polycarbonate)

Thin-wall parts, transparent sheets, electronic housings

Minimal impact on transparency; optical performance preserved

PC/ABS alloy

Automotive interior parts, office equipment, appliance housings

Improved flame retardancy, heat resistance, and mechanical properties

PA (polyamide)

Connectors, sockets, electrical components

Improved flame-retardant stability, reduced dripping

PBT

Electronic connectors, switch parts

Enhanced flame retardancy

PPO (polyphenylene ether)

High-temperature electrical parts, insulation materials

Higher flame-retardant rating, enhanced thermal stability

Other thermoplastics

Industrial parts requiring flame retardancy

Universal synergist, efficient at low dosage

Frequently Asked Questions (FAQ)

Q: What type of flame retardant is IOTA 6107? A: It is a powder-form phenylsiloxane resin with hydroxyl functionality, functioning as a silicone flame-retardant synergist to be used in combination with primary flame retardants.

Q: What is the recommended dosage of IOTA 6107? A: 0.5–1.0%, in combination with primary flame retardants (e.g., phosphorus-based retardants, KSS). It is not a stand-alone primary flame retardant.

Q: Does IOTA 6107 contain trifluoromethanesulfonic acid (TFMS)? A: No. IOTA 6107 uses an upgraded catalyst system and contains no TFMS or its salts.

Q: Does IOTA 6107 affect the transparency of PC? A: Minimal impact. Its refractive index is 1.56, close to PC; the verified formulation shows 88.6% transmittance and haze of only 1.22%.

Q: What is the flame-retardant mechanism of IOTA 6107? A: As a silicone synergist, it accelerates surface charring to form a dense char layer that blocks heat transfer and oxygen penetration, while also suppressing smoke.

Q: Which plastics can IOTA 6107 be used in? A: Primarily PC and PC/ABS alloys, and it is also compatible with PA, PBT, PPO, and other polymers for flame-retardant modification.

Recommend

    Online QQ Service, Click here

    QQ Service

    What's App