Hits: 248 img
IOTA 61038 is a colorless to slightly yellow transparent liquid with polysiloxane content ≥85%, density 1.2 g/cm³, and viscosity of 250–400 mPa·s at 25°C.
As a reactive resin, 61038 carries functional groups that participate in chemical reactions. It can undergo grafting reactions with organic resins, introducing siloxane segments into the organic resin backbone to fundamentally improve heat and weather resistance. It can also be used alone or blended to prepare moisture-curable coatings — curing with ambient moisture, convenient to apply and requiring no baking equipment.
The narrow molecular weight distribution is another key feature: it ensures consistent batch performance and uniform film formation, with consistent gloss, fullness, and hardness.
|
Property |
Value |
Notes |
|
Appearance |
Colorless to slightly yellow transparent liquid |
— |
|
Polysiloxane content |
≥85 % |
— |
|
Density |
1.2 g/cm³ |
— |
|
Viscosity (25°C) |
250–400 mPa·s |
— |
Note: the original source lists density as "g/m3"; based on the value 1.2 and industry convention this should be g/cm³, as presented above. Please verify against the official TDS.
|
Mode |
Description |
Suitable Scenarios |
|
Stand-alone use |
Used directly as the film-forming binder |
High-temperature anti-corrosion coatings, cookware coatings |
|
Blended with organic resins |
Combined with polyester/acrylic/alkyd/epoxy |
Improving heat and weather resistance of organic resins |
|
Grafting modification |
Introduces siloxane segments via graft reactions |
Deep modification of organic resins |
|
Moisture-curable coatings |
Alone or blended; cures with ambient moisture |
On-site application where baking is unavailable |
Q: What type of resin is IOTA 61038? A: It is a solvent-free, reactive methylphenyl polysiloxane resin with a narrow molecular weight distribution, appearing as a colorless to slightly yellow transparent liquid.
Q: What does "solvent-free" mean for IOTA 61038? A: The product is supplied without solvent dilution, with polysiloxane content ≥85% — a high-solids, low-VOC, eco-friendly resin.
Q: Which resins can IOTA 61038 be blended with? A: It is highly compatible with polyester, acrylic, alkyd, and epoxy resins, and can be blended or grafted to improve their heat and weather resistance.
Q: Can IOTA 61038 form moisture-curable coatings? A: Yes. It can be used alone or blended to prepare moisture-curable coatings that cure with ambient moisture — no baking equipment required.
Q: What coatings is IOTA 61038 suitable for? A: High-temperature anti-corrosion coatings and bakeware/cookware coatings used alone; films show high gloss, good fullness, and high hardness.
Q: What is the viscosity of IOTA 61038? A: 250–400 mPa·s at 25°C; density 1.2 g/cm³.